A functional hot water system is one of the best appliances you can have in your home. It ensures that you get a supply of hot water whenever you need it, whether it is for cooking, bathing or other domestic uses. There are many types and models of hot water systems in the market. Some are tankless, while others include a tank. The energy sources also differ a lot. 

Additionally, the type of service the tank will give you depends on how well you install it. Sometimes, you might choose an excellent tank but have it installed poorly, leading to endless water problems in the home. Here are three common mistakes to avoid when dealing with a hot water tank. 

Soldered Pipes

Soldering is one of the easiest ways to make joints and connections between metallic parts of the tank. The problem with the soldering process is that they use extremely hot flames, and the proximity of heated propane to your tank could lead to the fittings melting.

To prevent this from happening, the person handling the hot water system installation should detach the nipples from the tank. They should solder the water line to the nipples separately and as far as possible from the tank. When the two have cooled down, they can reattach the nipples to the tank. This will have protected the tank from heat damages during installation. 

Ignoring Safety Measures

A hot water tank is a very delicate set-up. It is composed of electric components and water. Gas-powered systems are also quite delicate, and you should avoid dry-firing them. 

When handling the installation and repair, ensure that the person restarting the system waits for the tank to get completely filled up with water before they try to restart the system. If they try to restart an electric tank before it is full of water, the electric filaments will burn out. A dry-fired gas tank could crack because of excess gas build-up.

Making Incompatible Metal Connections

One of the biggest problems that you have to deal with in hot water tank systems is corrosion. Using incompatible metals accelerates the rate at which your tank parts will corrode. 

Before buying any metallic parts, speak to an installation contractor and ask for their guidance in choosing compatible metallic parts.

A well-installed hot water system will serve you well and for a long time. Take your time and choose a plumber carefully because it will determine how well and how long the system you buy serves you. 

Share